WaveStack Modulate CV is a second AUv3 plugin that comes with the iPad app, from version 1.0.2. It sends CV and gates as audio, and your host passes that audio to a DC-coupled interface such as an ES-8 or ES-9. Its patch is saved with your host’s project, and it follows the host’s tempo and transport.
The CV plugin is part of Pro. Without Pro, it stays silent.
The CV plugin and the MIDI plugin are separate plugins. Use the CV plugin when you want to send CV and gates from inside a host.
Channels
The plugin has 8 channels, CV 1 to CV 8. It sends them on four stereo outputs:
| Plugin output | Left | Right |
|---|---|---|
| CV 1-2 | CV 1 | CV 2 |
| CV 3-4 | CV 3 | CV 4 |
| CV 5-6 | CV 5 | CV 6 |
| CV 7-8 | CV 7 | CV 8 |
When you add the plugin, Out 1 goes to CV 1, Out 2 goes to CV 2, and so on.
Set it up in AUM
- Connect your interface to the iPad’s USB-C port.
- Add a channel and choose WaveStack Modulate CV as its source. This channel carries CV 1-2.
- Set the channel’s output to the two interface outputs you want CV 1 and CV 2 on.
- For CV 3-4, add another channel. Choose the plugin’s multi-bus output as its source, and pick CV 3-4. Do the same for CV 5-6 and CV 7-8.
- On every channel, leave the fader at 0 dB and the pan centered, and don’t add effects.
The fader, pan and effects change the signal, and that changes the voltage. At 0 dB, the plugin sends the same voltages as the app. Send each channel straight to the interface outputs rather than through a bus with its own fader or a limiter.
Choose what each output sends
Open the plugin’s window and select an output. Under Goes to, choose:
- MIDI CC, to send MIDI as the MIDI plugin does. Route the plugin’s MIDI output in your host.
- CV, to send a control voltage. Set its Range and, if you want, Quantize it to a scale.
- Gate, to send a gate: 0 V or 5 V.
For CV and gates, pick the channel under Jack: CV 1 to CV 8.
There’s no interface setup in the plugin. Your host decides where each channel goes.
What the plugin can’t do
- It can’t use an ES-5 or its expanders. An output set to an ES-5 jack sends nothing.
- It has no CV in or clock in. It follows the host’s tempo instead.
For these, use the app. See CV and gates.
Other hosts
We’ve tested the CV plugin in AUM. A host that only uses a plugin’s first output gives you CV 1 and CV 2.